japanese
HOME products
Magnet Analyzer magnetizing fixtures magnetzer measuring instrument relation
campany contact



Measuring instrument relation
@
@
Tesla Meter@TM-4700
Tesla Meter type TM-4700 is able to measure flux density accurately in the range from 0.01mT to 4.0T.Auto zero calibration system and a data output terminal for RS-232C is fitted as standard equipment.

Peak hold function
Automatic zero point controller
High accuracy and low noise(dynamic range -90dB)
Tesla gauss unit change function
Impedance or inductance by frequency DC`5KHZ
Minimum resolution 0.01mT(0.1G)
Standard eauipment RS-232C
@

@
3-channel Tesla Meter@TM-4300

Available to measure flux of 3d(X.Y.Z) direction
Function of display angle for Vector flux
Peak hold function
Automatic zero function
Limit resolution 0.01mT (0.1G)
RS-232C as standard equipment
@

@
FLUX METER@DFM-101S
Flux meter Model DFM-101S is fitted with excellent integration circuit to lower drift to minimum. The measuring range is from 1Wb to 1,000mWb. This is multi- functional and practical type with built-in comparator and peak hold function.


Measurement range (1mWb10mWb100mWb1,000mWb)
With a unit change function (Wb,Nax.Turns)
Minimum reaolution (1wb)
Comparator mounted
Multifunction peak hold (P-P,ABS,N,S)
Ultra stabillity drift
Auto-zero function
Extral control is possible (RS-232C standerd equipment)
@

@
BACK EMF TESTER@EMF-301B2/EMF-300B2
BACK EMF TESTER EMFCthe instrument is able to measure a back EMF for centerless motor (3phases). Using a magnet circuit in a motor, it is excellent to measure the numerical value which is minutely exact to a truth value. for the custody of usual adopted magnets, it had been picked up a flux value(energy product only) so long time. However, our instrument picked up a peak-valu, and minimum value(cross) on a compounded wave after displaying a measured value.
and also to analysis a ripple rate and etc.,Analysing in development adaequatus device for inspection a processline.
@

After displayed Peak Average,Cross-value on panel Meter
Unneccessary In-put signal from sensingderice
@(have a switching function in circitmounted on instrument)
Hold function
RS-232C:Mounted by standard accessary (EMF-301B2)
Assorted analysing based under our origibal soft-ware
@(EMF-301B2option)

Specification and the outline appearance may be changed without notice.
@



Copyright 2005 DMT co.,ltd All right reserved
DESING MAGNETIZE TECHNOLOGY